10.0.0.93 router login
To open the admin panel, type 10.0.0.93 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.93 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no default username and password on record for 10.0.0.93. Because a device here has usually been handed its address by DHCP rather than configured at it, the address is a poor guide to what the device even is, let alone how to sign into it. Identify the hardware first, from the MAC address or the hostname in the lease table, then look up that model's shipped defaults on its own label or in its documentation, and expect a provider-issued unit to use a password unique to it.
How to log in to your router
Type 10.0.0.93 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.93, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Access problems at a DHCP-assigned address are frequently addressing problems rather than password problems: leases expire, devices move, and the host you remember at .93 may now be elsewhere in 10.0.0.0/24. Check the lease table before assuming a lockout. When a reset is genuinely required, the standard method is a recessed button held while the unit is powered, and the cost is the entire configuration — network settings, credentials, service definitions and anything synchronised from a controller — after which the device rejoins the network on a fresh address.
10.0.0.93 lies in 10.0.0.0/24, the very first /24 of the 10.0.0.0/8 range. That block is the largest defined by RFC 1918 — 16,777,216 addresses under a 255.0.0.0 netmask — and is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where it is subnetted far below /8.
Being the lowest segment, 10.0.0.0/24 turns up as a default in a great many places: virtualisation hosts, VPN concentrators, some provider-supplied routers, cloud subnets and appliance out-of-the-box configurations all gravitate to it. Its usable addresses are 10.0.0.1 to 10.0.0.254, and 10.0.0.255 is the broadcast address.
Host 93 is squarely a client number. It is not a gateway position, and it sits in the region where dynamic pools commonly allocate, so a device holding it is more likely to have been given the address than to have been assigned it deliberately. Most searches for this address come from someone who has found it in a lease table, a firewall log or a connection dialog and is trying to work out which machine it refers to, or why it cannot be reached.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.