10.0.0.96 router login
To open the admin panel, type 10.0.0.96 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.96 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default sign-in pair exists in the record for this address. That is expected rather than a gap: a mid-range host address in 10.0.0.0/24 could front almost any kind of equipment, and a credential borrowed from an unrelated product will simply fail or, worse, be typed into the wrong device. Get the real values from the hardware, which often prints them on a label, from the manual or support site, or from the internal documentation of whoever provisioned the network if this is a managed environment.
How to log in to your router
Type 10.0.0.96 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.96, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Where the password is genuinely lost, a reset is the fallback. On most consumer and small-business hardware that means holding a recessed button for roughly ten to thirty seconds; on managed equipment it is often a console-attached password-recovery sequence at boot. Either way, the device returns to shipped defaults and gives up its stored configuration, which regularly includes the very static assignment that placed it at .96, plus service settings and access rules. In a corporate or lab network the disruption extends to anything that depended on it, so notify whoever owns the segment before proceeding.
10.0.0.96 comes from 10.0.0.0/8, the widest private allocation in RFC 1918. Sixteen million addresses sit under the 255.0.0.0 mask, which is why the block is the default choice for organisations that need room to grow: corporate and campus networks, provider-managed customer equipment, carrier gear, VPN pools and container fabrics all draw from it, always subnetted far below /8. The address is private and reusable, so it belongs to no operator and points to no place.
The relevant segment here is 10.0.0.0/24, whose hosts run 10.0.0.1 to 10.0.0.254 with broadcast at 10.0.0.255. This is the very first /24 in the block and a popular default for small routers, VPN concentrators and lab networks alike. Position 96 is a mid-range host slot; it is not the position a gateway conventionally takes, and it lands inside the span many DHCP servers use for leases.
With all 254 host positions in this /24 documented, the segment is well travelled. Anyone searching this address is generally looking at a connected-devices list or a lease table and trying to match the address to a physical device, or has hit a login prompt they cannot get past.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.