10.0.0.98 router login
To open the admin panel, type 10.0.0.98 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.0.98 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default credential pair is known for 10.0.0.98, and inventing one would be worse than useless on a network of this kind. Addresses in 10.0.0.0/8 are frequently handed out by organisations that override shipped defaults during provisioning, so even a manufacturer's documented password may no longer apply.
For hardware you own, the label on the case and the model-specific manual remain the starting points. On managed or provider-supplied equipment, the working credentials are more likely to be held in a configuration management system, a password vault, or the administrator or provider who commissioned the device.
How to log in to your router
Type 10.0.0.98 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.0.98, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
On a managed network, restoring access is usually an administrative task rather than a physical one: check whether the device authenticates against a central directory or RADIUS service, whether a break-glass account exists, or whether its configuration is pushed from a management platform that can simply reapply a known-good state.
A factory reset is the expensive option here. It drops the device off the network entirely — losing its addressing, VLAN membership, routing, access control lists, certificates and any monitoring or backup integration — and someone must rebuild all of it. If the unit is under a support contract or provider management, ask before pressing anything.
10.0.0.98 comes from 10.0.0.0/8, the largest of the three private ranges reserved by RFC 1918. With a mask of 255.0.0.0 it covers 16,777,216 addresses, which is why it dominates in places that need room to grow: corporate and campus networks, provider-managed customer premises equipment, carrier-grade infrastructure, VPN client pools and container or orchestration fabrics. In practice the /8 is almost never deployed flat; it is carved into far smaller subnets, and this address sits in one of them.
That subnet is 10.0.0.0/24, addressable from 10.0.0.1 to 10.0.0.254 with 10.0.0.255 as the broadcast address. Host 98 is a mid-range position, not one of the low numbers customarily assigned to routers, firewalls or layer-3 switch interfaces. In managed environments an address in this part of a segment is typically either a DHCP lease or a deliberately reserved server or appliance address recorded in local documentation.
Anyone arriving here has usually seen 10.0.0.98 in a device inventory, a routing or ARP table, a firewall log or a VPN status page and wants to understand its role. Because the address is private, that answer lives entirely inside the network where it was observed.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.0.0/24
The 10.0.0.0/24 subnet runs from 10.0.0.1 to 10.0.0.254, with 10.0.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.